Filter
Top Products
Runco CX-40HD/CX-46HD Owner’s Operating Manual 57
PRE
L
IMINAR
Y
7.1
Crystal Series LCD
Display Specifications
Table 7-1 lists the Crystal Series LCD Display specifications.
7. Specifications
Table 7-1. Crystal Series LCD Display Specifications
Native Resolution: 1920 x 1080
Screen Size: CX-40HD = 40 in. (diagonal)
CX-46HD = 46 in. (diagonal)
Screen Aspect Ratio: 16:9
Available Aspect Ratios: 4:3, Letterbox, 16:9 (Anamorphic), VirtualWide™
DTV Compatibility: 480i/p, 576i/p, 720p, 1080i, 1080p
ISF Settings: Yes
Contrast Ratio: 1000:1
Data/Graphics Compatibility: Refer to Table 7-2
Vivix Processing: 3:2 or 2:2 pull down
Inputs: Multiple input combinations with up to
(4) Composite Video
(2) S-Video
(2) Component Video
(2) HDMI w/HDCP
(1) RGB (15-pin D-sub)
(1) RS-232 Control
(5) Analog Audio
(4 stereo RCA pairs + 3.5-mm stereo mini jack)
(1) RF Antenna
(1) CATV (75-ohm coaxial)
Outputs: (1) Composite Video
(1) Analog Audio (stereo RCA pair)
(1) Stereo headphone (3.5-mm stereo mini jack)
(1) Digital Audio (S/PDIF, RCA coaxial)
(1) Digital Audio (TosLink optical)
Audio System: 10W RMS x 2, L/R two-way Detachable Speaker System
Tuner: NTSC/ATSC Stereo (PAL as monitor only), HDTV,
PIP/PBP, Parental Control (V-Chip), Closed Caption
Discrete IR Control: Source, power and aspect ratios
Power Requirements: 100 to 240 VAC, 50/60Hz
Power Consumption: CX-40HD = 270W
CX-46HD = 310W
Operating Environment: 40ºF to 95ºF (5ºC to 35ºC);
20% to 80% humidity (non-condensing)
Dimensions: CX-40HD = see Figure 7-1
CX-46HD = see Figure 7-2