Filter
Top Products
Controls and Functions
6 Runco CX-52HD/CX-57HD Owner’s Operating Manual
PRE
L
IMINAR
Y
3. Volume Adjustment Buttons (VOL - / VOL +)
Use these buttons to adjust the sound volume. When a menu is visible on-screen,
these buttons operate identically to the left- and right-arrow (
and ) buttons on the
Crystal Series LCD remote control unit.
4. CH / CH
Use these buttons to scroll through available TV channels (CX-52HD only).
When a menu is visible on-screen, these buttons operate identically to the up- and
down-arrow (
and ) buttons on the Crystal Series LCD remote control unit.
5. Power Button
6. Remote Control Sensor
7. Status Indicator LED
- Lights red to indicate that the Crystal Series LCD is in standby mode;
- Lights green during power-on sequence and during normal operation;
- Flashes green when the Crystal Series LCD receives a signal from the remote
control.
Crystal Series LCD Inputs
and Outputs
Figure 2-2 shows the locations of the Crystal Series LCD inputs and outputs.
Figure 2-2. Crystal Series LCD Rear-Panel Inputs and Outputs
1. INPUT2 Audio Input
➤
L
R
Rear
INPUT2
INPUT4
INPUT3
INPUT4
INPUT3
INPUT1
INPUT1
S-VIDEO
VIDEO
Audio
Right Side
Monitor-Out
Monitor-Out