Filter
Top Products
19
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO LASERDISC PLAYER OR DVD PLAYER TO INPUT 2.
1. Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 2 (Y) jack as shown on the TV set below.
2. Connect the cable from the C
B
OUT or B-Y OUT of the Laserdisc or the DVD player to the INPUT 2 (C
B
) jack, as shown on the TV
set below.
3. Connect the cable from the C
R
OUT or R-Y OUT of the Laserdisc or the DVD player to the INPUT 2 (C
R
) jack, as shown on the TV
set below.
4. Connect the cable from the AUDIO OUT R of the Laserdisc or DVD player to the INPUT 2 (AUDIO/R) jack.
5. Connect the cable from the AUDIO OUT L of the Laserdisc or DVD player to the INPUT 2 (AUDIO/L) jack.
6. Press the INPUT button until VIDEO:2 appears, to view the program from the Laserdisc or DVD player. The mode VIDEO:2
disappears automatically after approximately eight seconds.
7. Press the INPUT button to return to the previous channel.
NOTES: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will
be abnormal if the connection is loose.
See page 15 for tips on REAR PANEL CONNECTIONS.
INPUT 2
TV INPUT 2
TERMINAL
(MONO)
VIDEO
S-VIDEO
AUDIO
L
R
Y C C
COMPONENT
BACK OF DVD PLAYER
HITACHI MODEL
or similar model
Y C C
R L
AUDIO
VIDEO
OUTPUT
BR
BR