Filter
Top Products
Operation
PlasmaWall SP Series Owner’s Operating Manual 33
PRE
L
IMINAR
Y
5. Click the Advanced button and click the
Monitor tab on the dialog box. Set the
vertical frequency to 60Hz and click OK.
1. The native resolution of the SP-42DHD is 1024 x 768; the native
resolution of the SP-50DHD and SP-60DHD is 1365 x 768. Other
horizontal or vertical resolutions may be scaled upward or
downward to fit the display.
2. With most computers, you can get the best picture at
1024
x 768 @ 60Hz.
3. For best results when using a computer, set the input on the
DHD Controller to HD Pass Thru 1 or HD Pass Thru 2, depending
on which RGB/HD input you are using.
To prevent image retention (burn) on your display, ALWAYS use a
screen saver and set it to the shortest possible time.
Note
WARNING