Filter
Top Products
22
Options button
Screen Setup button
Source Setup button
Source # button
Installers Setup button
Source type
INSTALLER GUIDE
Configuring Sources
For proper operation, Russound components
must be assigned the correct Source Type in the
UNO-TS2 Source Setup process. The following
chart references Russound components to UNO-
TS2 Source Types.
Russound Component Source Type
ST2 Tuner Russsound Tuner
ST2-XM Satellite Radio
SMS3 Media Server SMS3 Media Server
After sources have been configured and given
custom names (if applicable) in the CAV6.6 or
CAM6.6 system, they must also be configured in
the UNO-TS2. This procedure assigns the correct
screen templates for each source type.
1. The UNO-TS2 must be connected to the con-
troller and both must be powered on. Wait 20
seconds after being powered before beginning
the configuration process.
2. Press the “Options” button on the home screen.
3. Press the “Screen Set Up” button on the
Options screen.
4. Press and hold (for 3 or more seconds) the
“Installers Setup” button on the Screen Setup screen.
5. Press the “Source Setup” button on the
Installer Setup screen.
6. Press the “Source 1” button. When entering
the Source Setup menu for the first time after a
controller has been programmed, the Source
Name may take a few seconds to appear cor-
rectly in the Source Setup screen display. Simply
wait a few seconds and the correct Source
Name will appear.
7. Press the left/right arrows next to the source
type field on the screen until the proper source
type name appears. This type must match the
source connected to source 1 on the controller.
The Name field is automatically configured from
the controller.
8. Press the “back” button.
9. Repeat the last 3 steps for up to 5 more sources.
10. Press the “home” button.
11. Confirm that all configured sources appear
on the main screen buttons.
12. Press each of the source buttons and con-
firm that the correct screen is loaded.
Options
Screen Setup
Installers Setup
Source Setup
Source 1 Setup
CD Changer
CD