Filter
Top Products
34 English
Setup
HDMI Format
You can optimize the color setting from the HDMI
output by selecting a connected device Type.
TV : Select if connected to a TV via HDMI.
Monitor : Select if connected to a Monitor via
HDMI.
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to On
allows you to adjust the player's HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only
on a TV supporting this frame rate. This menu can
only be selected in 1080i or 1080p HDMI output
resolution modes.
On : Movie Frame (24Fs) functions is on.
Off : Movie Frame (24Fs) functions is off.
NOTE
If your TV does not support Movie Frame (24Fs)
function, a pop-up message is will be displayed.
Progressive Mode
Set to improve picture quality when viewing DVDs.
Auto : Select to have the player automatically
set the best picture for the DVD you're
watching.
Video : Select for the best picture quality from
concert or TV show DVDs.
Still Mode
Set the type of picture the player shows when you
pause DVD playback.
Auto : Automatically show the best still picture
depending on the content.
Frame : Select when pausing a scene with a
little action.
Field : Select when pausing a scene with a lot
of action.
•
•
•
•
✎
▪
•
•
•
•
•
HDMI Deep Color
Set to output the picture from the HDMI OUT jack
with Deep Color or without. Deep Color allows
more accurate color reproduction with deeper
color depth.
Auto : The picture is output with Deep Color
to the connected TV if it supports HDMI Deep
Color.
Off : The picture is output without Deep Color.
Audio
Digital Output
Lets you set the audio output format according to
the capabilities of your amplifier. (For more details,
see the digital output selection on the next page.)
PCM
Bitstream(Re-encode)
Bitstream(Audiophile)
NOTE
Be sure to select the correct Digital Output or you
will hear no sound or a loud noise.
If the HDMI device (Receiver, TV) is not compatible
with a compressed format (Dolby digital, DTS), the
audio signal outputs as PCM.
Regular DVDs do not have Secondary and Effect
audio.
Some Blu-ray Discs do not have Secondary and
Effect audio.
This Digital Output setup does not affect the analog
(L/R) audio or HDMI audio output to your TV.
It affect the optical and HDMI audio output when the
player is connected to a receiver.
If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of Digital Output
Selections (PCM or Bitstream).
•
•
•
•
•
✎
▪
▪
▪
▪
▪
▪
01945B-BD-C6900-XAC-ENG.indb 34 2010-02-22 오후 10:22:21