Filter
Top Products
7
CONNECTING THE CONVERTER
CONNECTING TO A TV
Use the supplied 75-ohm coaxial ca-
ble with F-type connectors to connect
the 75-ohm terminal on your TV to the
RF OUT
terminal on the back of the
converter. If your TV has only 300-
ohm terminals, use a 75-to-300 ohm
transformer (not supplied), available
from your local RadioShack store.
CONNECTING TO CABLE
How you connect your converter de-
pends on the complexity of your video
system. Refer to the connection ex-
amples on the next few pages to find
the one that is most similar to your
system.
Notes:
• Your system might use a combina-
tion of two or more of the following
examples. If you have questions,
take a diagram of your system to
your local RadioShack store for
assistance.
• Check local regulations before
connecting any device to your
cable system.
Connect the cable company’s coaxial
cable to the
RF IN
terminal on the back
of the converter.
15-1981.fm Page 7 Tuesday, March 30, 1999 9:09 AM