Filter
Top Products
27
ENG
Switching the Sound Off Temporarily
You can switch the sound off temporarily, for example you may
wish to answer the telephone.
1 Press the MUTE button.
Result:
The sound is switched off and “ ” is displayed.
2 When you wish to turn the sound back on at the same volume as
before, press the MUTE button again (or either of the volume
buttons).
◆ Press the + button to increase the volume (cursor moves to the right)
◆ Press the
-
button to decrease the volume (cursor moves to the left)
➣
The volume setting is retained:
◆ When you switch the television to standby mode
◆ When you switch the television off using the
“POWER ” (ON/OFF) button on the front panel
◆ If there is a power failure.
Adjusting the Volume
Volume 12
Using the LNA (Low Noise Amplifier) Feature (Option)
This feature is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise.
This feature is working only weak signal condition, and that is
memorized on current channel, additional.
1 Press the MENU button.
Result:
The “Picture” menu is displayed.
2 Press the + or – button.
3 Press the ▲ or ▼ button to select the “LNA”.
4 To select the “On” by pressing the + or – button.
5 When you have finished, press the TV button, or press the MENU
button repeatedly to return to normal viewing.
Select Adjust Exit
Picture
Mode Custom
Adjust
Digital NR : Off
Tilt : 0
LNA : On