Samsung 32Z7 CRT Television User Manual


 
23
Scan mode
You will normally find that scan mode is best set to Natural
to reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
changing the scan mode.
Natural, Digital and
Progressive modes are available.
Digital NR
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
Tilt
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting.
LNA
This feature is very useful in the situation that the TV is used
in a weak signal and amplifies the TV signal in the weak
signal area, but not noise.
This feature is working only in a weak signal condition, and
that is memorized on current channel, additional.
1 Press the MENU button.
Result
:
The options available in the
Picture
group are
displayed.
2 Press the
-
or + button.
3 Select the required option (Scan mode, Digital NR, Tilt or
LNA) by pressing the or button.
4 Press the
-
or + button to change the setting.
Scan mode : Natural, Digital or Progressive
Digital NR : Off or On (activating)
Tilt : -7 to +7
LNA : Off or On (activating)
Extra Picture Settings
ENG
Select Adjust Exit
Picture
Mode
Dynamic
Adjust
Scan mode : Natural
Digital NR : Off
Tilt : 0
LNA : Off
Select Adjust Exit
Picture
Mode
Dynamic
Adjust
Scan mode : Natural
Digital NR : Off
Tilt : 0
LNA : Off
Select Adjust Exit
Picture
Mode
Dynamic
Adjust
Scan mode : Natural
Digital NR : Off
Tilt : 0
LNA : Off
Select Adjust Exit
Picture
Mode
Dynamic
Adjust
Scan mode : Natural
Digital NR : Off
Tilt : 0
LNA : Off