Filter
Top Products
MagicInfo Pro - Server Requirement
CPU RAM Ethernet OS Application
Minimum P1.8 Ghz 256 M 100 M / 1
G
Windows
XP
WMP 9 or lat-
er
Recommended P3.0 Ghz 512 M 100 M / 1
G
Windows
XP
WMP 9 or lat-
er
PowerSaver
This LCD Display has a built-in power management system called PowerSaver. This system saves
energy by switching your LCD Display to low-power mode when it has not been used for a certain
amount of time. The LCD Display automatically returns to normal operation when you press a key on
the keyboard. For energy conservation, turn your LCD Display OFF when it is not needed, or when
leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant
video card installed in your computer. Use the software utility installed on your computer to set up this
feature.
PowerSaver (When used as a Network monitor)
State Normal Operation Power saving mode Power off
EPA/ENERGY 2000
Power Indicator Green Green, Blinking Amber
Power Consump-
tion
330 W Less than1watts 1 watts
PowerSaver (When used as a normal monitor)
State Normal Operation Power saving mode Power off
EPA/ENERGY 2000
Power Indicator Green Green, Blinking Amber
Power Consump-
tion
270 W Less than1watts 1 watts
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjusts the screen as follows.
Display Mode Horizontal
Frequency
(kHz)
Vertical Fre-
quency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
Specifications