Filter
Top Products
27
ENG
Your television has several settings which allow you to control
picture quality.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the † or … button to select Picture.
Result
:
The options available in the
Picture
group are
displayed.
3 Press the ENTER () button.
4 Select the required option (Custom, Colour Tone) pressing the
† or … button.
5 Press the † or … button to select Custom. Press the ENTER
() button.
Result
:
The
Custom
menu is displayed.
6 Press the ENTER () button to change the setting.
The options are displayed in the following order.
◆ Custom : Contrast, Brightness, Sharpness, Colour,
Tint(NTSC ONLY)
➣
Custom Options available in PC, DVI Mode: Contrast,
Brightness, Sharpness.
➣
The horizontal bar is displayed. Move the horizontal bar’s
cursor left or right by pressing the
œ or √ button.
➣
When the picture mode is set to Custom, the settings values
may vary depending on the input source.
(ex. RF, Video, Component, PC or DVI)
➣
If you make any changes to these settings, the picture
standard is automatically switched to the
Custom.
◆ Colour Tone : Cool2, Cool1, Normal, Warm1, Warm2
7 When you are satisfied with the settings, press the EXIT/TV ()
button to return to normal viewing.
➣
If you make any changes to these settings, the picture
standard is automatically switched to the
Custom.
Adjusting the Picture Settings
Custom
TV
Contrast 70
Brightness 50
Sharpness 70
Colour 50
Tint G50 R50
Contrast 70
Mode : Dynamic
√√
Custom
√√
Colour Tone : Normal
√√
Colour Control
√√
Film Mode : Off
√√
Size : 16 : 9
√√
DNIe : On
√√
PIP
√√
Picture
Move Enter Return
TV
Move Enter Return
Mode : Dynamic
Custom
Colour Tone : Normal
Colour Control
Film Mode : Off
Size : 16 : 9
DNIe : On
PIP
Picture
Move Enter Return
TV
Cool2
Cool1
Normal
Warm1
Warm2
BN68-00597A-01 4/2/04 6:38 PM Page 27