Filter
Top Products
Instructions for the settings:
1. Send Right Click : You can enable the right-click function (default). Click and press on
any area on the screen for two seconds. The right-click menu will pop up. Right-click is
only� available in Mouse Emulation mode.� In general, the “Delay” value is set to 1000
(1 second) and the “Area” value is set to 32px, to obtain the best performance regarding
the right-click function.
2. Enable Double Click : Same as the mouse's double click function. If you double click an
object in accordance with the Speed and Area settings, it will open. The parameter set-
tings for best operation are a “Speed” value between 500 and 550 and an “Area” value
of 32px.
3. Drag Delay: This function shows the amount of time (in milliseconds) to wait before
“Drag” is executed after being clicked. If the object cannot be precisely selected or the
cursor jitters when you attempt to touch, adjust Drag Delay to the correct value by drag-
ging the slide bar.� It is displayed in milliseconds.
Settings for touchscreen in strong light, rain and snow conditions
A snowflake or raindrop can cause an unwanted single touch operation. The "Enable Delay"
function will prevent such a false screen touch.
Using the Software
49