Filter
Top Products
28_ connections
connections
CONNECTING TO AN AUDIO SYSTEM (7.1 CHANNEL AMPLIFIER)
- BETTER QUALITY
Using the 7.1CH Audio Cables (Not included), connect the 7.1 ANALOG AUDIO OUT (Front R, Front L,
CENTER, SUBWOOFER, Surround L, Surround R, SURR.BACK L , SURR.BACK R)
terminals on the rear
of the Blu-ray Disc Player to the 7.1 Channel ANALOG AUDIO IN (Front R, Front L, CENTER,
SUBWOOFER, Surround L, Surround R, SURR.BACK L, SURR.BACK R) terminals of your Amplifier.
Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT terminals on the rear of the
Blu-ray Disc Player to the HDMI, COMPONENT or VIDEO IN terminal of your TV. (See pages 22~26)
Turn on the Blu-ray Disc Player, TV and Amplifier.
Press the input select button of the Amplifier to select the external input in order to hear sound from the
Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
Please set the audio in the menu screen according to the Amplifier. (See pages 39~42)
The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your
Amplifier.
The front left and right outputs on your player and 7.1 channel amplifier must be connected to hear disc
menu audio from certain Blu-ray discs.
When connecting to a 5.1 channel home theater or receiver, connect all the Analog Audio output jacks from
the player except for the Surround Back Left/Surround Back Right outputs.
1.
2.
3.
4.
M
7.1CH Audio cables
(Not included)
7.1 Channel Amplifier
01791G-BD-P3600-XAC-ENG-NEW.indb28 28 2009-07-17 오후 2:07:10