Filter
Top Products
ENG-19
Connections
ENG-18
CONNECTIONS
1
Using an Anynet cable, connect the Anynet Input (Green)
terminal on the rear side of the DVD player to Anynet Output
(Balck) terminal of the TV.
2
Using an Anynet cable, connect the Anynet Output (Black)
terminal to Anynet Input (Green) terminal of other AV device.
3
Setup the Anynet function on the TV supporting Anynet, and
enjoy the Anynet feature.
GREEN
BLACK
BLACK
GREEN
DVD Receiver
AV Receiver
Set-Top Box
Recorder
GREEN
GREEN
GREEN
Connection to a TV with Anynet Jack
What is Anynet?
- The function enables a user to control all AV devices through the menu display on the TV screen
just using one single TV remote control.
- This function works only for models supporting the Anynet.
- Using Anynet, you can easily control a DVD Player with your TV.
- For detailed operation steps and connections, refer to the user’s manual that supports Anynet.
- Please note that you need to set the Anynet on the TV to use the Anynet function.
Note
- Anynet operation is only available for TV sets that support Anynet.
- If Component (Progressive) or S-Video connection was used, some features of Anynet will not be available.
Use Video/Audio cable for the connection.
- Anynet function will not operate when Input and Output terminals are connected wrongly, because the TV
cannot communicate with external devices.
- Anynet terminals are consisted of Input (Green) and Output (Black) terminals.
- Match the color-coded cables to terminals when you connect the Anynet cable.
CONNECTIONS
Note
- Please turn the volume down when you turn on the Amplifier.
Sudden loud sound may cause damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 61 to 62)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Connection to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT, HDMI or DVI IN
terminal of your TV as described on pages 12 to 16.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
RED
WHITE
RED WHITE
2-Channel stereo amp
Audio Cable
HD950-XSS-1 6/11/05 9:49 AM Page 18