Filter
Top Products
navigating the setup menu
48_Navigating the Setup Menu
The following describes each option found in the
Display Setup Menu.
❶
TV Aspect
Depending on a type of television you have,
you may want to adjust the screen setting
(aspect ratio).
- 4:3 Letter Box : Select when you want
to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with
a 4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
- 4:3 Pan&Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
❷ Screen Messages
Use to turn on-screen messages On or Off.
❸ Black Level
Adjust the brightness of the screen. (On or
Off) It does not function in Progressive
mode.
❹ Video Output
Select Video Output.
- I-SCAN : Select when you want to use
Component Interlace (480i) Out.
- P-SCAN : Select when you want to use
Component Progressive (480p) Out.
• If the Yes/No selection in the Display Setup
sub Menu is not made within 10 seconds,
the screen returns to the previous menu.
DISPLAY SETUP
TV Aspect
Screen Message
Black Level
Video Output : I-SCAN
4:3 Letter Box
4:3 Pan&Scan
√ 16:9 Wide
DISPLAY SETUP
TV Aspect : 16:9 Wide
Screen Messages : On
Black Level : Off
Video Output
√ I-SCAN
P-SCAN
• Consult your TV User’s Manual to find
out if your TV supports Progressive
Scan. If Progressive Scan is supported,
follow the TV User’s Manual regarding
Progressive Scan settings in the TV’s
menu system.
• If Video Output is set incorrectly, the
screen may be blocked.