Filter
Top Products
28 English
Connections
Wireless Network
You can connect to network with a Wireless IP sharer.
A wireless AP/IP router is required to make a wireless network connection.
Connect the wireless LAN adapter to the Wireless LAN Adapter on the front panel of the product.
Set the network options. (See pages 38~42)
NOTE
Use only the Samsung wireless LAN adapter with this product. (Model name: WIS09ABGN).
Do not use this adapter with any other third-party products.
Please contact the retailer of this product for purchasing the wireless LAN adapter.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the
wireless network.)
Wireless LAN, by its nature, may cause interference, depending on the operating conditions.
(AP performance, distance, obstacles, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following security protocols are supported:
Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, AES
To use the AllShare function, you must connect your PC to your network as shown in the figure.
The connection can be wired or wireless.
1.
2.
✎
▪
▪
▪
▪
▪
1)
2)
▪
Wireless IP Sharer
Wireless LAN Adapter
Networking with PC for
AllShare function
(See pages 57~58)
Broadband
service
01942N-BD-C6900-XTC-ENG.indb 28 2010-04-23 오후 5:56:43