English 37
05 Setup
NOTE
This function is not available if the HDMI cable does
not support CEC.
If your Samsung TV has an
n
logo, then it
supports the Anynet+ function.
Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
BD Data Management
Lets you manage the downloaded contents from
a Blu-ray Disc that supports the BD-LIVE service.
You can check the device information including
the storage size, delete the BD data or change the
Flash memory device.
Change Device allows you to select either the
player’s Internal Memory or External Memory
(connected USB Device).
If the data to be stored from BD-LIVE is greater
than the size of the remaining memory or the
Internal Memory is full, connect an External USB
device, and then select External Device in the
menu.
Description of Device(Storage) Information on
the Player
Total Size : Total size of the Device (Storage).
Available Size : Available size of the Device
(Storage).
NOTE
In the external memory mode, disc playback will
be stopped if you disconnect the USB device in the
middle of the playback.
✎
▪
▪
▪
•
•
✎
▪
Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported. We
recommend you use USB devices that support the
USB 2.0 protocol with 4 MB/sec or faster read/write
speed.
The Resume Play function may not work after
formatting the storage device.
The total size of BD Data Management may differ,
depending on the conditions.
Clock
Set time-related functions.
Clock Mode : You can set it to Auto or
Manual.
If you select Manual, the Clock Set menu will
be activated and DST will be deactivated.
Clock Set : You can specify the current time
and date manually.
Time Zone : You can specify the time zone that
is applicable to your area.
DST : You can set DST (Daylight Saving Time)
on or off.
▪
▪
▪
•
•
•
•
Display
Audio
System
Network
Language
Security
General
Support
Settings
BD Data Management
Current Device : Internal Memory
Total Size : 589MB
Available Size : 588MB
Delete BD Data
Change Device : Internal Memory
" Select ' Return
Display
Audio
System
Network
Language
Security
General
Support
Settings
Clock
Clock Mode : Auto
Clock Set
Time Zone : GMT + 0:00
DST : Off
> Move " Enter ' Return