Filter
Top Products
The Beo4 VMEM / VTAPE button option
On your BOSSCOM modied Beo4 remote control, the VMEM button can be pro-
grammed, to open a specic source on your non B&O TV.
As the BOSSCOM controller is able to operate many die
rent TV models, there might be some sources in the
table, that is not available on your TV. The only way to nd out if your TV accepts these codes, is testing
each of the options.
If a source is not access able using these options, sources must be accessed the same w
ay as using the TVs
original remote control. Using the source button.
VMEM/ VTAPE options
Enter one of these codes within 10 seconds, to select the source on the non B&O TV that will be selected
with the VMEM or VTAPE button.
No new source selected.
The AV1 socket on the TV is opened.
The AV2 socket on the TV is opened.
The DTV tuner on the TV is opened.
The Component 1 socket is shifted to.
The Component 1 socket is accessed.
The
HDMI 1 socket is accessed.
The HDMI 2 socket is accessed.
S-VHS 1
USB Wiselink