Filter
Top Products
Programme stepping, up/ down manoeuvring in menus.
Most set top boxes and TV’s has 4 arrow buttons for manoeuvring in or screen menus,
up, down, left and right. In addition they are equipped with separate programme step-
ping buttons for zapping through the programme list. Often these keys are named P+, P
-, CH+ or CH -.
BOSSCOM often makes use of the and the keys for programme zap-
ping. This way the four up, down, left and right buttons are free to be used for the more
natural use of manoeuvring in
on screen menus.
Using a Beo4 Navi in mode 2, manoeuvring in On-screen menus is fully handled using
the added ‘joy-stick’, not available on previous Beo4 models. In a Beo4 Navi setup we
therefore can make use of the up and down arrows for programme zapping.
Setting the Zap Mode Option
If the BOSSCOM controller is not set to operate in Navi mode, the Beo4 but-
tons
and a
re used for programme stepping. The and buttons
are used to manoeuvre up and down in an on-screen menu. This is the default factory
setting, as described above.
Selecting the Zap mode buttons:
En
ter one of these 2 codes within 10 seconds to set the preered Programme Zap mode buttons.
The and buttons will be used for pro-
gramme zapping.
The & buttons will be used for pro-
gramme zapping.