Samsung CL21M21MQ CRT Television User Manual


 
INSTALLATION
14
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable
TV system (according to the instructions on pages 11-14). Skip step 1 if you have not yet
connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back
of the TV.
4
Connect a coaxial cable
between the ANTENNA
OUT terminal on the cable
box and the BIN terminal
on the RF(A/B) switch.
5
Connect another cable
between the other OUT
terminal on the splitter
and the AIN terminal on
the RF (A/B) switch.
6
Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the ANTENNA
terminal on the rear of the
TV.
After youve made this connection, set the A/B switch to the A position for normal view-
ing. Set the A/B switch to the B position to view scrambled channels. (When you set the
A/B switch to B, you will need to tune your TV to the cable boxs output channel, which is
usually channel 3 or 4.)
Incoming
Cable
Cable Box
RF (A/B)
Switch
Splitter
Incoming
Cable
Cable Box
RF (A/B)
Switch
Splitter
Incoming
Cable
Cable Box
RF (A/B)
Switch
TV Rear
Splitter
2
Connect the cable or
antenna to the
ANTENNA IN terminal on
the back of the VCR.
Incoming
Cable or
Antenna
VCR Rear Panel
03668A_Latin_ENG 5/19/05 2:08 PM Page 14