Filter
Top Products
YOUR NEW TV
8
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 11 – 18.
Œ
VIDEO INPUT jack
Video signals from VCRs, DVD players and similar
devices.
´
AUDIO INPUTS (INPUT1
and 2)
/DVD AUDIO INPUTS
(INPUT 2)
Audio signals from VCRs, DVD players and similar
devices.
Use these jacks to connect the audio signals from
a DVD player when using the DVD video input
jacks. When not using the DVD jacks, these audio
jacks function as audio for Video 2 or S-VIDEO.
ˇ
AUDIO-VIDEO MONITOR
OUTPUT jacks
These audio-video signals are identical to A/V
signals being displayed on the big screen.
(Typically used as the input signals for a recording
VCR.)
¨
SUPER VIDEO INPUT jack
(Depends on the model)
S-Video signal from an S-VHS VCR or DVD player.
Note: In S-Video mode, Audio Output depends
what kind of audio input source is connected to
the side audio input jacks (AV2).
ˆ
COMPONENT VIDEO INPUT
jacks
Connect video from a DVD player.
Ø
ANTENNA
Connect to an antenna or to a cable TV system.
CL29M6/CL29K5MQ/CL29M16MQ/CL29M5MQ
CL25M6MQ/CL29M6MQ/CL25M5MQ/CL29T21PQ
CL29M21PQ
CL29A10/CL34A10
CL21T21PQ/CL21S8MQ
CL21M21PQ/CL21M21MQ
03668A_Latin_ENG 5/19/05 2:08 PM Page 8