Filter
Top Products
OPERATION
English - 22
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH and CH
buttons to scan through the channels. This eliminates the need to change channels by
entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels, you must specify
the type of signal source that is connected to the TV (i.e., an antenna or a cable
system).
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button
2
Press the ENTER button
to select “Air/Cable”.
Press the ▲ or ▼ button
to select “Air” or “Cable”,
then press the ENTER
button.
Move Enter Return
Channel
Air/Cable : Air
√√
Auto Program
√√
Add/Delete
√√
Fine Tune
√√
Name
√√
LNA : Off
√√
Move Enter Return
Channel
Air/Cable : Air
Auto Program
Add/Delete
Fine Tune
Name
LNA : Off
Air
Cable
AA68-03671H-00Eng_Latin 1/9/06 9:20 AM Page 22