Filter
Top Products
OPERATION
English - 24
▼
STD, HRC and IRC identify
various types of cable TV systems.
Contact your local cable company to
identify the type of cable system that
exists in your particular area.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH (…) and
CH (†) buttons to scan through the channels. This eliminates the need
to change channels by entering the channel digits. There are three steps for memorizing
channels: selecting a broadcast source, memorizing the channels (automatic) and adding
and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
Press the ▲ or ▼ button
to select “Channel”, then
press the ENTER button
2
Press the ▲ or ▼ button
to select “Air/CATV”, then
press the ENTER button
Move Enter Return
Channel
Auto Program
√√
Add/Delete : Deleted
√√
Air/CATV : Air
Name :
----
Move Adjust Return
Channel
Auto Program
√√
Add/Delete : Deleted
√√
Air/CATV : Air
Name :
----
3
Repeatedly press the
œœ
or
√√
button to cycle
through these choices:
“Air” (antenna) “STD”,
“HRC” or “IRC” (all cable
TV)
Press the EXIT button to
exit.
Move Adjust Return
Channel
Auto Program
√√
Add/Delete : Deleted
√√
Air/CATV : STD
Name :
----
AA68-03585A-X0Eng_Latin 4/14/05 7:31 PM Page 24