Samsung CL32A20HE CRT Television User Manual


 
OPERATION
25
Memorizing the Channels
Your TV can memorize and store all of the available channels for both off-air (antenna)
and cable channels. After the available channels are memorized, use the CH and
CH buttons to scan through the channels. This eliminates the need to change chan-
nels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-
ing channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
Press the or button to
select Channel, then press the
ENTER button
2
Press the or button to
select Air/CATV.
Note: STD, HRC and IRC identify various types of cable
TV systems. Contact your local cable company to identify
the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed
to Storing Channels in Memory (next page).
3
Repeatedly press the
œœ
or
but-
ton to cycle through these choic-
es: Air(antenna) STD,HRC
or IRC(all cable TV).
Press the EXIT button to exit the
menu.
Move Enter Return
Channel
Auto program
Add/Delete
Fine tune : 00
Air/CATV : Air
Name : - - - -
LNA : On
Move Adjust Return
Channel
Auto program
Add/Delete
Fine tune : 00
Air/CATV
œœ
Air
Name : - - - -
LNA : On
Move Adjust Return
Channel
Auto program
Add/Delete
Fine tune : 00
Air/CATV
œœ
Air
Name : - - - -
LNA : On
K61A_AA03472A_00Eng_WLink 4/23/04 7:20 PM Page 25