Samsung CS34A10 CRT Television User Manual


 
English - 21
You can select the type of picture which best corresponds to your
viewing requirements.
1 Press the MENU () button.
Result
: The main menu is displayed.
2 Press the or button to select Picture.
Result
:
The options available in the
Picture
group are
displayed.
3 Press the ENTER () button.
Result
:
The
Mode
is selected.
4 Select the required picture effect by pressing the œ or button
repeatedly.
Result
: The following picture effects are available:
Dynamic
-
Standard
-
Movie
-
Custom
You can also set these options simply by pressing the
P.MODE
(;
Picture Mode) button.
Changing the Picture Standard
Move
œœ
Adjust Return
Picture
Mode
œœ
Dynamic
Custom
Color Tone : Normal
Size : Normal
Scan Mode : Natural
More
TV
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise. This feature is working only weak signal condition,
and that is memorized on current channel, additional.
1 Press the MENU
()
button.
Result
: The main menu is displayed.
2 Press the or button to select Channel.
Result
: The options available in the Channel group are
displayed.
3 Press the ENTER ()button.
4 Press the or button to select LNA.
5 To activate this feature, select On by pressing the œ or button.
Setting the LNA option to “On” may produce worse picture
quality due to the current channel’s signal condition.
Hence, apply LNA On/Off selectively according to the
picture quality that is currently displayed.
Using the LNA (Low Noise Amplifier) feature (depending on the model)
Move
œœ
Adjust Return
Channel
More
Fine Tune
LNA
œœ
On
TV
AA68-03330A-01EngAsia 10/13/04 5:59 PM Page 21