Filter
Top Products
English - 55
Connecting to the PC Input (depending on the model)
➢ The PC VIDEO INPUT/RCA(AUDIO-L+R) connectors are used for interfacing with your PC.
First, click on Settings on the Windows start menu.
While
Settings is highlighted, move the cursor so that
Control Panel is highlighted.
When the control panel screen appears, click on
Display and a display dialog-box will appear.
Navigate to the
Settings tab on the display dialog-box.
The correct setting of size (resolution) is 640 x 480 pixels.
If a vertical-frequency option exists on your display settings
dialog box, the correct value is
60 or 60 Hz. Otherwise, just
click
OK and exit the dialog box.
➢
How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. But the actual screens on your PC
will probably be different, depending upon your particular version of Windows and your particular video
card. But even if your actual screens look different, the same, basic set-up information will apply in almost
all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
Side of the TV
Personal Computer
➢
Only black signal is output
from a monitor in PC mode.
AA68-03330A-01EngAsia 10/13/04 5:59 PM Page 55