Filter
Top Products
English - 5
Setup - Blue Screen
Blue Screen If no signal is
being received or the signal
is very weak, a blue screen
automatically replaces the noisy
picture background. If you wish to
continue viewing the poor picture,
you must set the “Blue Screen”
to “Off”.
R.Surf Feature
This feature allows you to set
the TV to return to a particular
channel after a certain amount of
time. For example, you may be
watching a channel when
commercials start. You can set
the R.Surf to “5 minutes”, then
switch channels. After minutes,
the TV will return to the original
channel.
Press the R.SURF button on the remote control repeatedly to
set the timer in thirty second intervals, up to five minutes.
Picture -
Mode / Custom / Color Tone /
Digital NR / DNIe Jr
Mode:
Dynamic/Standard
Movie/Custom
You can select the type
of picture which best
corresponds to your viewing
requirements.
Contrast/Brightness/
Sharpness/Color/Tint
The TV has several settings
which allow you to control
the picture quality.
Color Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can change the color of the entire screen according to
your preference.
Reset
The previously adjusted picture settings will be reset to the
factory defaults.
Digital NR
If the signal received by the TV is weak, you can activate
this feature to reduce any static and ghosting that may
appear on the screen.
DNIe Jr (Digital Natural Image engine Junior)
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
enhancement. New image compensation algorithm gives
brighter, clearer, much detailed image to you.
DNIe Jr
technology will fit every signals into your eyes.
Setup - Child Lock
This feature allows you to
prevent unauthorized users,
such as children, from watching
unsuitable programmes by
muting out video and audio. Child
Lock cannot be released using
front (or side) panel buttons.
Only remote control can release
the Child Lock setting, so keep the remote control away from
children.
Child Lock : On/Off
You can activate or deactivate the Child Lock function.
Channel : Channel number to be locked.
Lock : When press the ENTER button, the “Locked” is
displayed.
➢
If any channel is locked, you can not access to the
“Channel” and “Child Lock” menu by using the control
buttons on the TV panel (the “Not Available” is displayed
in the “Child Lock” menu). You can access by using the
remote control only.
Surf 00: 29
Move
Enter Return
Picture
Mode : Dynamic ►
Digital NR : Off ►
DNIe Jr : On ►
Move
Enter Return
Mode
Mode : Dynamic ►
Contrast : 100
Brightness : 50
Sharpness : 75
Color : 50
Tint : G 50 R 50
Color Tone : Cool1 ►
Reset ►
Move
Enter Return
Child Lock
Child Lock : On ►
Channel : P 11
Lock : ?
Move
Enter Return
Setup
Plug & Play ►
Time ►
Child Lock ►
Blue Screen : Off ►
AA68-03905G-01_Eng.indd 5 2007-03-14 ｿﾀﾈﾄ 4:02:00
(depending on the model)