Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable).
1 Press the MENU
()
button.
Result
: The main menu is displayed.
2 Press the ENTER () button to select Input.
Result
: The options available in the Input group are
displayed.
3 Press the ENTER () button again to select Source List.
Result
: The options available in the Source List group are
displayed.
4 Press the ▲ or ▼ button to select signal source, then press the
ENTER () button.
➢
When you connect equipment to the TV, you can choose
between the following sets of jacks :
EXT1 or EXT2 on the
TV’s rear panel, and
AV/S-Video on the TV’s side panel.
➢
You can also set these options simply by pressing the
SOURCE () button. If you change the external source
while viewing, pictures might take a short period of time to
be switched.
Edit Name
1 Press the MENU
()
button.
Result
: The main menu is displayed.
2 Press the ENTER () button to select Input.
Result
: The options available in the
Input group are
displayed.
3 Press the ▲ or ▼ button to select Edit Name.
Press the
ENTER () button.
Result
: The options available in the Edit Name group are
displayed.
4 Press the ▲ or ▼ button to select external device :
EXT1 - EXT2 - AV - S-Video.
5 Select the name by pressing the œ or √ button.
6 Set other signal sources (EXT1, EXT2, AV, S-Video) using the
same method as listed above.
Viewing an External Signal Source/Edit Name (depending on the model)
Move Enter Return
Input
Source List : TV
√√
Edit Name
√√
TV
Move Enter Return
Input
Source List : TV
√√
Edit Name
√√
TV
Move
œœ √√
Adjust Return
Edit Name
EXT1
œœ
------
√√
EXT2 : ------
AV : ------
S-Video : ------
TV
Move
œœ √√
Adjust Return
Edit Name
EXT1
œœ
DVD
√√
EXT2 : ------
AV : ------
S-Video : ------
TV
Move Enter Return
Source List
TV
EXT1 : ------
EXT2 : ------
AV/S-Video : ------
TV
English - 35
AA68-03660A-00Eng 7/21/05 2:58 PM Page 35