Filter
Top Products
OPERATING THE RECEIVER
GB-15
DCB-B270R
GB
ABLE RECEIVER
Main Menu
After installing your antenna system and STB with
appropriate connectors.
● Plug in the AC main power and switch on the receiver.
● Press the MENU key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed.
For the sub-menus Guide, Channel, Timer and Setup.
1. EPG-Electronic Program Guide
The electronic program guide gives you a channel list for
the channels.
● Select “GUIDE” in the main menu, then press the
OK key.
RED key : Time interval can be adjusted by pressing
this key. It is rotated by 30 minutes.1st: 30 minutes
2nd: 1 hour 3rd: 1 hour and 30 minutes
GREEN key : Green key is for moving back to the
previous date.
YELLOW key : Yellow key is for moving to the next
coming date.
● Press the PG+/PG- or
➐
/
❷
keys to select the desired
channel, then press the OK key.
NNoottee : Quick way to access the GUIDE menu : Just
press the GUIDE key while you are viewing a
program.
● If the information of highlighted program doesn't appear
fully, INFO key will be available any time. You can scroll
the window by pressing PG+/PG- or
➐
/
❷
keys.
● When the TIMER key on the remote control is pressed
in the EPG screen, if the current channel involves an
event, timer is set immediately and the set timer is
indicated on the EPG screen. A program that has been
set in this way is indicated on "Scheduled Timers" menu
in "Timer" menu.
00418A_B270R_XEN_Eng 3/22/07 2:35 PM Page 15