Filter
Top Products
GB-19
DCB-B270R
GB
OPERATING THE RECEIVER
3. Timer
Through this menu you can reserve the programs and
configure the settings.
3.1 Scheduled Timers
You can see the channels you reserved through EPG or
manual settings.
● To add the timers press the RED key. You can reserve
the program manually.
● To edit the timers press the GREEN key after
highlighting the cursor on the program you want to edit.
But it is impossible to edit the timers which was set
through EPG.
● To delete the timers press the BLUE key after
highlighting the cursor on the program you want to
delete.
3.2 Manual Setting
You can reserve the programs manually.
Set channel, date, start/end time and frequency by using
➛
/
❿
or
➐
/
❷
keys
3.3 Guard-Band Time
Guard-Band time is a function to ensure, that whole event
will fit in set time boundaries. 1 minute of Guard-Band
Time means that STB will start this timer operation 1
minute before set time and end 1 minute after set time.
NNoottee : If the timers are conflicted with guard-band
time, they will not be reserved.
ABLE RECEIVER
00418A_B270R_XEN_Eng 3/22/07 2:35 PM Page 19