Filter
Top Products
114
Sound Adjustment
5
5 Sound Adjustment
SRS CS Headphone (Off / On)
You can hear virtual 5.1ch surround sound over the headphones.
Equalizer
The Equalizer displays a series of sliders. Use the up and down arrow keys to select a slider. Use the
left and right arrow keys to change the slider’s value. To Reset the Equalizer, select Reset and
press [ ], then select YES and press [ ]. To exit, select Close, and then press [ ].
Equalizer is available in the standard sound mode only.
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific
bandwidth frequencies.
Reset: Resets the equalizer to its default settings.
5.3 3D Audio (UE46A & UE55A models only)
MENU Sound 3D Audio ENTER
5.3.1 3D Audio (Off / Low / Medium / High)
3D audio technology provides the immersive sound corresponding to the pop-up effect of 3D video by
audio depth control in perspective.
Available in only when watching 3D image.
5.4 Speaker Settings
MENU Sound Speaker Settings ENTER
Speaker Select (External / Internal)
If you are listening to the sound track of a broadcast or movie through an external receiver, you may
hear a sound echo caused by the difference in decoding speed between the product speakers and
the speakers attached to your audio receiver. If this occurs, set the product to External.
When you set Speaker Select to External, the product speakers are turned off. You will hear
sound through the external speakers only. Sound will be audible only from the external
speakers if external speakers are connected when Speaker Select is set to Internal.
If there is no video signal, both the product speakers and the external speakers will be mute.
O
m
O
m