Filter
Top Products
160
System
8
8 System
8.12.3 Receiver
Sound is played through the receiver.
The connected device is not
displayed.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. Make sure the device is
connected to your product with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.
If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat
the device scan.
The product sound is not
output through the receiver.
Connect the optical cable between product and the receiver.
Problem Possible Solution