Samsung DVD-V85 VCR User Manual


 
Clearing a Preset Station
23
GB
If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1 After pressing the MENU, press the OK or
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
buttons to select the Install
option.
3 Press the OK or
to select this option.
Result
: The Install menu is displayed.
4 Press the corresponding
or
buttons, until the Manual
Setup option is selected.
5 Press the OK or
to select a Manual Setup option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the corresponding
or
buttons, until the required preset
TV station (PR) is selected.
7 Press the CLEAR button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button four times to exit the
menu.
You do not need to preset the stations manually if you
have already set them automatically.
1 After pressing the MENU, press the OK or
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
buttons to select the Install
option.
3 Press the OK or
to select this option.
Result
:The Install menu is displayed.
4 Press the corresponding
or
buttons, until the Manual
Setup option is selected.
5 Press the OK or
to select a Manual Setup option.
Result
:The TV STATION TABLE menu is displayed.
6 Press the
or
buttons to select a programme number as
required.
7 Press the
❿
button to preset the station.
Result
:The MANUAL TUNING menu is displayed.
8 Press the
or
buttons to start scanning channel.
Result
: The frequency band is scanned and the first station
found is displayed.
9 Press the
or
buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the
❿
button.
Result
: The first letter of the name flashes.
11 To... Then...
Select a character Press the
or
button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the
or
buttons
previous character respectively.
12 If you... Then...
Wish to store the Press the
or
❷
buttons until the MFT
station displayed is selected.
Press the
or
buttons to adjust the
picture, if necessary.
Press OK to store the station
Do not wish to Press the
or
buttons until the CH
store the station is selected.
displayed
Press the
or
buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step 14
13 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14 On completion, press the RETURN button three times to exit the
menu.
22
GB
VCR
Presetting the Stations Manually
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
MANUAL TUNING
PR :
CH : - - -
MFT : -
NAME : - - - -
MEMORY : OK
RETURN
TV STATION TABLE
PR CH NAME
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
Language : English
User Set
Auto Power Off : Off
Screen Messages : On
Install
PR CH NAME
1 21
2
3
4
5
TV STATION TABLE
SWAPPING : OK
DELETE : CLEAR RETURN
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
Auto Setup
Manual Setup
Install
VCR Output CH : CH 38
Australia Model
Newzealand Model
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
Auto Setup
Manual Setup
Install
VCR Output CH : CH 38
Australia Model
Newzealand Model
VCR