Filter
Top Products
CONNECTIONS
Choosing a Connection
TV (Normal, Widescreen, Projection, etc..)
Method 1
Method 2
Method 3
Connection to a TV (For Video)
TV
Method 1
Method 2
Method 3
18 19
Choosing a Connection
Before Connecting the DVD Player
Connection to an Audio System
Method 1 Method 2 Method 3
AUDIO
SYSTEM
DVD
PLAYER
e.g) DVD-E435
DVD
PLAYER
The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for
more information on those particular components.
Mixed Audio Out Analog Audio Out Digital Audio Out
2ch Amplifier
Audio Input Jacks
5.1ch Analog Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jacks
Good
picture
Better
picture
Best
picture
Basic Audio
Audio Output Jacks
OR
OR
OR
AV Cable
S-Video
Cable
Scart Cables
(not included)
Video Output Jack
S-Video Jack
Scart Jack
DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
DVD Player + TV with Scart Input Jack (Audio & Video)
(If Scart jack is selected in the VIDEO OUT SELECT.)
NOTE
• If Scart Jack is selected, S-Video will not work.
• If S-Video is selected, Scart Jack will not work.
DVD Player + 2ch Stereo
Amplifier or Dolby Pro Logic Decoder
DVD Player + Amplifier with 5.1ch
Analog Input Jacks
DVD Player + Amplifier with Dolby
Digital Decoder/DTS Decoder/MPEG-2
An Example of Connecting DVD with Other Equipment
(DVD-E335/DVD-E435)
Method 1
Method 2
Method 3
e.g) DVD-E435