Filter
Top Products
English -
23
Case 3: Connecting to an AV
amplifier with a digital
output jack
If your AV amplifier has a Dolby Digital, MPEG2 or
DTS decoder and a digital input jack, use this
connection. To enjoy Dolby Digital, MPEG2 or DTS
sound, you will need to set up the audio settings.
(See page 35)
This allows you to connect your DVD Recorder to other
external devices and view or record their outputs.
● Case 1 : Connecting a VCR, Set-Top Box(STB), DVD
player or Camcorder to the AV3 IN jacks
● Case2 : Connecting a DV Device to the DV IN jack
Case 1 : Connecting a VCR,
Set-Top Box(STB), DVD player
or Camcorder to the AV3 IN
jacks
Connecting a VCR or external device to AV3 IN jacks of
the DVD Recorder.
You can record from connected equipment (VCR, STB,
DVD player or Camcorder).
Connecting to AV3 IN, DV
input jack
■
AV 3 in selection will be automatically
done. If the input is not selected
automatically, use INPUT button to select
proper input.
■
Copy protected content cannot be
recorded.
NOTE
DVD
STB
VCR
Camcorder
yellow
white
red
yellow
white
red
Connecting & Setting UP
or
Rear(L)
Front(L)
Subwoofer Center
Front(R)
Rear(R)
1-00687A-R120-UK_19~42 3/10/05 5:19 PM Page 23