Filter
Top Products
36 37
GB GB
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛ Before presetting a recording, check that the date and
time are correct.
1 Insert the cassette and press TIMER on the remote control.
Result
: The TIMER PROGRAMMING menu is displayed.
2 Press
❿
to select the input source.
3 Select the required station by pressing the
,
❷
buttons or
INPUT SEL.
to select the LINE1, LINE2 input sources.
4 Press
❿
to select the recording day.
5 Select the required day by pressing the
or
❷
buttons.
6 Press
❿
to select the recording start time.
7 Select the required hour value by pressing the
or
❷
buttons.
8 Press
❿
to select the minutes.
9 Select the required minute value by pressing the
or
❷
buttons.
10 Press
❿
to select the recording stop time.
11 Select the required recording stop time by pressing the
or
❷
buttons, following the same procedure as when selecting the
recording start time.
12 Press
❿
to select the recording speed.
13 Press the
or
❷
buttons to select the SP (Standard Play), LP
(Long Play), Auto (Auto Tape Speed Select) recording speeds.
14 When you have finished, press the RETURN button.
15 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢ Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
Using the Timer Programming Feature
OPEN/CLOSE
STANDBY/ON
15
Standard
G-Code
Timer Method
Modifying G-CODE Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press M
ENU a second time to confirm.
If you wish to... Then...
Select an input source other ◆ Press the
➛
or
❿
buttons, until the PR selection flashes.
than the tuner (LINE IN 1 or LINE IN 2)
◆ Press the INPUT SEL. button one or more times to change the
input source selection.
Result
: The programme number is replaced by:
• The LINE IN 1 or LINE IN 2 source using the
INPUT SEL. button for a satellite tuner or
external video source
➢ The input source must be selected before changing any
other value.
Record a programme every day ◆ Press the
➛
or
❿
buttons, until the DAY selection flashes.
(Monday to Sunday) at the same time
◆ Press the
or
❷
buttons, until the DLY (Daily) value is
displayed.
Record a programme every week ◆ Press the
➛
or
❿
buttons, until the DAY selection flashes.
on the same day and at the same time
◆ Press the
or
❷
buttons, until the W- (Week) value is
displayed, followed by the required day.
Example
: W-SA(Weekly Saturday)
Extend the recording time ◆ Press the
➛
or
❿
buttons, until the STOP selection flashes.
◆ Press the
or
❷
buttons to increase or decrease the stop
time.
Select the recording speed ◆ Press the
➛
or
❿
buttons, until the recording speed selection
flashes.
◆ Press the
or
❷
buttons until the correct indication is
displayed:
• AUTO (Auto Tape Speed Select) : see page 37
• SP(Standard Play)
• LP(Long Play)
VCR VCR