Samsung DVD-E360K DVD Player User Manual


 
11
Note
•IfVideoOutputissetincorrectly,thescreenmaybeblocked.
•Whentheresolutionischangedduringplayback,itmaytakeafewsecondsforanormal
image to appear.
Audio Options allows you to setup the audio device and sound status settings depending on the
audio system in use.
1. With the unit in Stop mode, press the MENU button. Press the √/® buttons to select
SETTINGS, then press the ENTER button.
2. Press the π/† buttons to select AUDIO, then press the ® or ENTER button.
3. Press the π/ buttons to select the desired item, then press the ® or ENTER button.
Setting Up the Audio Options
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
1. With the unit in Stop mode, press the MENU button. Press the /® buttons to select
SETTINGS, then press the ENTER button.
2. Press the π/ buttons to select LANGUAGE, then press the ® or ENTER button.
3. Press the π/ buttons to select the desired language, then press the ® or ENTER button.
Note
- The language is selected and the screen returns to Language Setup menu.
- To make the setup menu disappear, press the MENU button.
- If the selected language is not recorded on the disc, the original pre-recorded language is selected.
- Select “Original” if you want the defaultsoundtrack language to be the original language the disc
is recorded in.
Setting Up the System Options
1. With the unit in Stop mode, press the MENU button. Press the /® buttons to select
SETTINGS, then press the ENTER button.
2. Press the π/ buttons to select SYSTEM, then press the ® or ENTER button.
3. Press the π/ buttons to select the desired item, then press the ® or ENTER button.
Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
Note :
- When play a disc that has MPEG Audio and you have Bitstream selected in the Audio Options
menu, the Digital Audio jack may not output audio
- There is no analogue audio output when you play a sound disc.
- Even when PCM Down sampling is Off
 •Somediscswillonlyoutputdownsampledaudiothroughthedigitaloutputs.
Setting Up the Security Options
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels
on a disc.
Setting Up the Rating Level
1. With the unit in Stop mode, press the MENU button. Press the /® buttons to select
SETTINGS, and then press the ENTER button.
2. Press the π/ buttons to select SECURITY, and then press the ® or ENTER button.
3. The first time you access security, you must enter the default password: 0000. To enter the
default password, highlight 0 on the screen and press the ENTER button 4 times. To change
the default password.
4. Press the π/ buttons to select PARENTAL, and then press the ® or ENTER button.
5. Press the π/ buttons to select the rating level you want, and then press the ENTER button.
The higher the rating level, the more mature the allowable content.
- If you select the Kid Safe level, discs rated level 2 or higher will not play unless you enter the
password.
Security Levels :
KID SAFE
G (General Audiences) : All Ages Admitted
PG (Parental Guidance suggested) : Some material may not be suitable for young children.
PG 13 (PG-13 Parents strongly cautioned) : Some material may be inapproriate for children
under 13.
PGR (Parental Guidance Recommended) : These are not necessarily unsuitable for children, but
viewer discretion is advised, and parents and guardians are encouraged to supervise younger
viewers.
R (Restricted) : Under 17 requires accompanying adult
NC17 (NC-17) : No one 17 and under admitted.
ADULT
Note:
- If you have forgotten your password, see “Forgot Password” in the Troubleshooting Guide.
2. Press the π/ buttons to select DISPLAY, then press the ® or ENTER button.
3. Press the π/ buttons to select the desired item, then press the ® or ENTER button.
- Select “Automatic” if you want the subtitle language to be the same as the language selected as
the audio language.
- Some discs may not contain the language you select as your initial language; in that case the
disc will use its original language setting.
Changing the Password
To change the password, follow these steps:
1. On the Settings Menu, Select Security, and then press the ENTER button.
2. Enter the current 4 digit password. If you have never changed the password, enter the default
password: 0000. To enter a number, use the /®/π/ buttons to highlight a number, and then
press the ENTER button.
3. Select Change Password, and then press the ENTER button.
4. Enter the new 4 digit password. Use the /®/π/ buttons to select a number, and then press