Filter
Top Products
DIGITAL
COXIAL OPTICAL
DIGITAL OUT
DIGITAL
COXIAL OPTICAL
DIGITAL OUT
■ Digital Connection
Digital Output (optical)
After the completion of above connections;
1. Set the “Digital Output” to “PCM” (see page 54) in “AUDIO SETUP”.
■ Digital connection to audio component or MD player without Dolby Digital decoder
• Audio CD or Video CD
Play the disc, with the audio mode set to “Left” or “Right”. When connecting digitally,
DTS-encoded audio tracks will produce distorted sound.
• DVD Disc
When playing a Linear PCM Audio encoded disc, you must use the digital connection
method shown above.
CD recording using digital connection to a MD
When digitally connecting to an MD to record the content of a CD, track numbers on the MD
and the CD may not match.
NO
NO
TE:
TE:
Only use an optical Digital Cable which has been designed for use with portable DVD.
21
ENGLISH
20
Connecting to a Stereo Component Connecting to a Stereo Component
ENGLISH
Optical Digital Cable
Audio component equipped with
optical digital input jack
Connect to optical digital input jack
Playing Dolby Digital (5.1-CH) and DTS Audio
•
You can enjoy full and dynamic surround sound by connecting a Dolby Digital/DTS
digital surround processor or amplifier equipped with a Dolby Digital/DTS surround decoder
to the optical digital jack on the DVD player.
•
When using DTS digital surround, select the DTS audio by using the disc menu screen
or function adjustment screen.
After making the connections shown above;
1. Set the “Digital Output” to “Bitstream” (see page 54) in “AUDIO SETUP”.
Caution
•
To play a DTS disc, you need a DTS processor or amplifier.
•
If the DTS processor or amplifer you want to use does not have an optical digital input jack,
digital connection is not possible.
•
Refer to owner’s manual of the processor or amplifier for details on connections.
Optical Digital Cable
(Sold Separately)
Connect to an Optical Digital Input Jack
Dolby Digital (5.1-Channel)/DTS
processor or amplifier