Filter
Top Products
ENG-7
Description-Rear Panel
OPTICAL
COAXIAL
R
Pr Pb Y
L
S-VIDEO OUTVIDEO OUTANALOG AUDIO OUT
COMPONENT VIDEO OUT
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use either a coaxial digital cable to connect to a
compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains
a Dolby Digital, MPEG-2 or DTS decoder.
2.
DIGITAL AUDIO OUT JACKS (DVD-P248K only)
• Use either an optical cable to connect to a
compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains
a Dolby Digital, MPEG-2 or DTS decoder.
3. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your
television, audio/video receiver.
4. VIDEO OUT JACK
• Use a video cable to connect to the Video input
jack on your television.
• The Video Output in Setup Menu must be set to
the Component(I-SCAN) or S-Video.
5. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to
the S-Video jack on your television for a higher
picture quality.
• The Video Output in Setup Menu must be set to
the S-Video.
6. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with
Component Video in jacks. These jacks provide
Pr, Pb and Y video. Along with S-Video,
Component Video provides the best picture
quality.
• If Component(P-SCAN) Video Output is select-
ed in Setup Menu, progressive scan mode will
work.
• If Component(I-SCAN) Video Output is selected
in Setup Menu, interlaced scan mode will work.
Important Note
Important Note
• Consult your TV User’s Manual to find out if your
TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV
User’s Manual’s instructions regarding Progressive
Scan settings in the TV’s menu system.
• If Component(P-SCAN) Video Output is selected
in Setup Menu, Video and S-Video will not work.
• See page 31 to get more information on how to
use the Setup Menu.
12 3 4 5 6
ENG-6
Description-Front Panel
STANDBY/ON
EZ VIEW LOADINGPLAY
1 45678
9
1011 12 13
Front Panel Controls
1. STANDBY/ON ( )
• When the player is plugged in, the Power LED
lights. If you press the STANDBY/ON button to
turn on the player, the LED goes out.
2. MIC
• Connect Microphone for karaoke functions.
3. MICROPHONE VOLUME / DIGITAL ECHO
• Use to adjust microphone volume level and
echo delay.
4. SKIP ( ) / SEARCH
• Allows you to search backward through a disc.
Use to skip the title, chapter or track.
5. STOP ( )
• Stops disc play.
6. PLAY/PAUSE ( )
• Begin or pause disc play.
7. SKIP ( ) / SEARCH
• Allows you to search forward through a disc.
Use to skip the title, chapter or track.
8. EZ VIEW
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
9. OPEN/CLOSE ( )
• Press to open and close the disc tray.
10. PLAY LED
• When playing the disc, the Play LED lights.
11. REMOCON RECEIVER
12. LOADING LED
• When loading the disc, the Loading LED lights.
13. DISC TRAY
• Place the disc here.
Power LED Play LED Loading LED
(Red) (Green) (Orange)
Power off/Standby O X X
No disc X X O
Stop X X O
Loading X X Blinks
Play/Skip X O X
Search/Pause X Blinks X
Error Blinks Blinks Blinks
Function
LED
DVD-P148
STANDBY/ON
EZ VIEW
MIN
MIC
VOLUME DIGITAL ECHO
MAX
LOADING
PLAY
DVD-P248K
12 435678
9
10 11 12 13