Filter
Top Products
basic functions
14_ basic functions
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video
Input by pressing TV/VIDEO button on the TV
remote control.
- If you connected an external Audio System, turn
on your Audio System and set it to the correct
Audio Input.
After plugging in the player, the first time you press the
DVD POWER button, this screen comes up: If you want
to select a language, press
π/†
button, then press the
ENTER button. (This screen will only appear when you
plug in the player for the first time.)If the language for the
startup screen is not set, the settings may change when-
ever you turn the power on or off. Therefore, make sure
that you select the language you want to use. Once you
select a menu language, you can change it by pressing
the
button on the front panel of the unit for more than
5 seconds with no disc in the unit. Then the SELECT
MENU LANGUAGE window appears again where you
can reset your preferred language.
Playback
1. Press the OPEN/CLOSE ( ) button. The tray opens.
2. Place a disc gently into the tray with the disc’s label
facing up.
3. Press the PLAY/PAUSE (
) button or OPEN/ CLOSE
(
) button to close the disc tray. When you stop disc
play, the player remembers where you stopped, so
when you press PLAY/PAUSE (
) button again, it will
pick up where you left off.
4. Stopping Play
Press the STOP (
) button during play.
6. Pausing Play
Press the PLAY/PAUSE (
) on the remote control
during play.
- Screen stops, no sound.
To resume, press the PLAY/PAUSE (
) button once
again.
5. Removing Disc
Press the OPEN/CLOSE ( ) button.
Note
- If the player is left in the stop mode for more than one
minute without any user interaction, a screen saver will
be activated. Press the PLAY/PAUSE
(
) button to resume normal play.
- If the player is left in the stop mode for more than
about 30 minutes, the power will automatically shut off
except when the MIC is connected.(Automatic Power-Off
Function)
- If the player is left for about 5 minutes in pause mode,
it will stop.
- This (
) icon indicates an invalid button press.
English
Français
Deutsch
Español
Italiano
Nederlands
7. Step Motion Play (Except CD)
Press the SKIP (
) button on the remote control during
PAUSE mode.
- Each time the button is pressed, a new frame will
appear.
- No sound is heard during STEP mode.
- Press the PLAY/PAUSE (
) button to resume
normal play.
- You can only perform step motion play in the forward
direction.
8. Slow Motion Play
Press the SEARCH (
/ ) button to choose the
play speed between 1/2, 1/4 and 1/8 of normal during
PAUSE mode.
- No sound is heard during slow mode.
- Press the PLAY/PAUSE ( ) button to resume normal
play.