Samsung DVD-P348 DVD Player User Manual


 
ENG-31ENG-30
Troubleshooting
Before requesting service (troubleshooting), please check the following.
No operations can be
performed with remote.
The screen ratio cannot
be changed.
No audio.
Play mode differs from the
Setup Menu selection.
Disc Menu doesnt appear.
The icon appears on
screen.
Forgot password
The screen is blocked
If you experience other
problems.
5.1 channel sound is not
being reproduced.
Disc does not play.
Check the batteries in the remote. They may need replacing.
Operate the remote control at a distance of no more than 20 feet.
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try to operate the remote again.
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
5.1 channel sound is reproduced only when the following condi-
tions are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the Dolby 5.1 ch mark
on the outside.
Check if your audio system is connected and working properly.
In a SETUP Menu, is the Audio Output set to Bitstream?
The features or action cannot be completed at this time because:
1. The DVDs software restricts it.
2. The DVDs software doesnt support the feature (e.g., angles).
3. The feature is not available at the moment.
4. Youve requested a title or chapter number or search time that
is out of range.
Check if the disc has a Menu.
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The Screen Ratio is fixed on your DVDs.
Make sure you have selected the correct Digital Output in the
Audio Options Menu.
Press power on from a cold start with no disc in the unit. Press the
SEARCH/SKIP ( ) button on the front panel for 1 second. The
SELECT MENU LANGUAGE display will appear. Select the num-
ber button of the desired language.
Press power on from a cold start with no disc in the unit. Press the
SEARCH/SKIP ( ) button on the front panel for 1 second. The
SELECT MENU LANGUAGE display will appear. Select the num-
ber button of the desired language. Press the MENU button, and
then press DOWN button to select the Parental Setup. The
Parental Setup is now unlocked as
indicated on the display. You can change your password.
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
Action
Problem Page
P3
P5
P9
P27
P11
P24~30
P28
P27
P29
P29~30
Setting Up the Rating Level
1.
With the unit in Stop mode, press the MENU button.
2. Select Setup using UP/DOWN buttons, then
RIGHT or ENTER button.
The player is locked ( ).
3. Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4. Enter your password.
The Parental Setup screen appears.
CREATE PASSWORD
Re-enter Password
- - - -
0 ~ 9
RETURN
5. Select Rating Level using UP/DOWN buttons,
and press ENTER or RIGHT button.
6. Select Rating Level you want using UP/DOWN
buttons. For example, if you select up to Level 6,
discs that contain Level 7, 8 will not play.
- To cancel the Rating Level, select No using RIGHT or
ENTER in Use Password.
About the Change Password;
- Highlight Change Password using UP/DOWN buttons.
- Press ENTER button.
The Change Password screen appears.
- Enter your new password. Enter the new password again.
Note
Note
How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
If you have forgotten your password, see Forgot
Password in the Troubleshooting Guide.
Setting Up the Parental Control
PASSWORD CHECK
Enter Password
- - - -
0 ~ 9
RETURN
RATING LEVEL
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
e.g) Setting up in LEVEL6.
DVD-P348(GB)/XTC 5/25/04 8:31 AM Page 30