Filter
Top Products
28 - English
System Setup
Quick Recording Setting
It takes about 10 seconds for a disc to load (initialize)
every time you turn on the unit. To bypass this
initialization process, you can set the Quick Recording
feature to On. This enables you to record immediately
without having to wait for the disc to load.
1
With a disc inserted and the unit in Stop mode, press
the MENU button on the remote control
2
Select Setup using the
…†
buttons, then press the
ENTER or
√
button.
You can't use the Setup functions while playing a disc.
3
Select System using the
…†
buttons, then press the
ENTER or
√
button.
System menu will be displayed.
4
Select Quick Recording using the
…†
buttons, then
press the ENTER or
√
button.
Quick Recording menu will be displayed.
5
Select On using the
…†
buttons, then press the
ENTER or
√
button.
System
DVD-Recorder
Title List
Playlist
Disc Manager
Timer Rec.
Setup
CM Skip Time : 15 Sec
√√
EP Mode Time : 6 Hours
√√
Chapter Creator : Off
√√
Quick Recording : Off
√√
■
The Quick Recording is set to Off as
default.
NOTE
DVD-RW(VR)
RETURNENTERMOVE
EXIT
This menu is used to set the current time. You must set
the time first to use timer recording.
Select the current date and time (Month, Day,Year,
Hour, Minute and AM/PM) using the
…†
œ √ or
number buttons and then press the ENTER button.
When the current time is stored in memory and the set
is powered off, the current time will appear in the front
panel display.
…†
: Sets the value
You can set the value using the number (0~9) buttons.
œ √
: Moves to items
Manual Clock Set
DVD-Recorder
No Disc
Timer Rec.
Setup
Month Day Year Hour Minute AM/PM
01 01 2007 12 00 AM
MON
…
†
■
The Menus are slightly different depending on whether a
disc is inserted or not .The menus described on the
next few pages are with no disc in the unit.
■
The menus are not available during playback or recording.
NOTE
RETURNENTERMOVE
EXIT
Clock Set