Filter
Top Products
20_ connecting & setting up
connecting & setting up
CONNECTING THE VIDEO OUTPUT
There are several other ways to connect your DVD Recorder.
Select one of the video connections on the following pages.
Connecting to Component Video Input Jacks (Y, P
B
, P
R
)
Connect Component video cables (not supplied) between the COMPONENT OUT (Y, PB, PR) jacks on the
DVD Recorder and COMPONENT IN (Y, PB, PR) jacks on your TV.
You will enjoy high quality images. Component video separates the picture element into black and white(Y),
blue(P
B), red(PR) signals to present clear and clean images.
Connect the audio cables(white and red) between the Component AUDIO OUT jacks on the DVD Recorder
and Component AUDIO IN jacks on your TV(or AV amplifi er). (See pages 21~22)
Progressive scan
- If your TV supports Progressive Scan, you can enjoy higher quality video by Progressive Scan Setting.
(The component cable has to be connected.)
Compared to standard interlaced video, progressive scan doubles the amount of video lines fed to your TV, resulting
in a clearer, more stable, and fl icker free image than interlaced video. The component output jack of the DVD player
can be used for progressive output mode, which is only available with TVs that support progressive scan.
Progressive Scan Output (480p)
Consumers should note that not all high defi nition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. If you experience 480p progressive scan picture problems, it is
recommended that you switch the connection to the ‘standard defi nition’ output. If there are questions regarding TV
set compatibility with this model, please contact our customer service center at 1-800-SAMSUNG.
•
•
•
M
BlueGreen Red
01580A-R170-XAZ-ENG.indb 2001580A-R170-XAZ-ENG.indb 20 2008-06-10 오후 5:00:132008-06-10 오후 5:00:13