Samsung DVD-V70 VCR User Manual


 
14 15
GB GB
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1 Connect the coaxial cable as indicated on page 13.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result: The Language Set menu is displayed.
3 Select the required language by pressing the
or
buttons.
4 Press OK to store the language selected.
Result
: A message appears.
5 Press OK button.
6 Press OK to start the auto scanning.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
Auto preset can be performed by pressing
(STOP) on
the VCR continuously for 5 seconds or more with no
tape inserted.
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
2
TV
Auto setup
Please wait...
00 %
Clock Set
12 : 01 1/JAN 2003/
TUE
Time Date Year
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment, such as
camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
Camcorder
VCR
Sound system