Filter
Top Products
English _13
● GETTING STARTED
Step 3 : Recording
There are two different recording methods, Direct Recording (recording a programme you are currently
watching) and Timer Recording.
Timer recording is classified as follows : Recording mode : HQ (high quality mode), HSP, SP (standard quality
mode), LSP, ESP, LP, EP, SLP (Long duration mode) according to the recording mode.
When recording is set in the AUTO mode, the best quality picture is recorded with regards to the remaining
time on the disc.
Step 4 : Playing
To start playback, select the title you want to play from the title list.
A DVD consists of sections called titles, and sub sections called chapters.
During recording, a title is created between two points where you start and stop recording.
Chapters will be created automatically regardless of the disc type when it is set at the setup menu.
Step 5 : Editing a recorded disc
Editing on discs is easier than conventional video tapes.
The recorder supports many different edit functions, possible only with DVDs.
With a simple and easy edit menu, you can operate various edit functions, such as delete, dubbing, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RAM/-RW/-R in VR mode)
With this DVD Recorder & VCR, you can create a new playlist on a disc and edit it without the original,
pre-existing recording.
Step 6 : Finalising & Playing on other DVD components
To play your DVD on other DVD components, finalising may be necessary. First, finish all editing and
recording operations, then finalise the disc.
When using a DVD-RW/-R disc in VR Mode
Although finalising is generally unnecessary when playing the disc on a VR Mode compatible component, a
finalised disc should be used for playback.
When using a DVD-RW/-R disc in Video Mode
The disc should be finalised first to enable playback on anything other than this recorder.
No more editing or recording can be made on the disc once it has been finalised.
To enable recording on the disc again, the disc must be unfinalised.
When using a DVD+R disc
You should finalise the disc to play it on a component other than this DVD Recorder & VCR.
No more editing or recording can be made on the disc once it has been finalised.
You can finalise the disc automatically using EZ Record. (See page 38)
M
`
01589T(00)-VR370,375-XSA-ENG.ind13 13 2009-04-13 오후 4:12:43