Filter
Top Products
YOUR NEW TV
Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected continuously,
such as a VCR or a DVD player. For more information on connecting equipment, see pages
10~17.
8
Œ
Antenna terminals
Two independent cables or antennas can be
connected to these terminals. Use “ANT 1 IN” and
“ANT 2 IN” terminals to receive a signal from VHF/
UHF antennas or your cable system.
Use the“ANT 1 OUT” terminal to send the signal
being received by the “ANT 1 IN” terminal out to
another component (such as a Cable Set-Top Box).
The PIP channel can be received only when a signal
source is connected to “ANT 1 IN”.
´
Audio/Video Output jacks
Connect to the audio/video input jacks of a
recording VCR.
ˇ
Video Input jacks
Connect to the video output jacks of VCRs, DVD
players and similar devices.
¨
Audio Input jacks
Connect to the audio output jacks of VCRs, DVD
players and similar devices.
ˆ
S-Video Input jack
Connect to S-VIDEO output jacks of an S-VHS VCR
or DVD player.
Ø∏
COMPONENT Input jacks
(Y, P
B
, P
R
, AUDIO-L/R)
Connect to the audio and video outputs of DVD or
DTV Set-Top Box. 480i/480p/1080i Y,PB and PR
video signal outputs are available.
”
HDMI/DVI Video Input jack
(High Definition Multimedia Interface)
Connect to the HDMI jack for device with HDMI or
DVI output.
’
DVI Audio Input jacks
(Digital Visual Interface)
Connect to the digital audio output jacks for device
with DVI output.
BP68-00289A-02Eng 7/21/04 10:01 AM Page 8