Filter
Top Products
17
INSTALLATION
Connecting to DVI (Digital Visual Interface)
By inputting a high-bandwidth digital content protection high-definition picture source to the
DIGITAL INPUT jack on the TV, high-definition pictures can be displayed on the screen in
their digital forms. (This DIGITAL INPUT jack is for use in the future when high-bandwidth
digital content protection DTV decoders, DVD players and D-VHS are put on the market.)
1
Connect a set of audio cables between the “DVI IN
(AUDIO-L, R)” jacks on the TV and the AUDIO OUT
jacks on the Set-Top Box.
2
Connect a video cable between the “HDMI/DVI IN”
jack on the TV and the VIDEO OUT jack on the Set-Top
Box.
• The DIGITAL INPUT jack can only be used with 1080i and 480p picture signals. Set the DTV decoder
DIGITAL OUTPUT jack output setting to 1080i or 480p. The DIGITAL INPUT jack is not compatible
with the picture signal of a PC.
Connecting to HDMI (High Definition Multimedia Interface)
Connect a HDMI cable between the “HDMI/DVI IN”
jacks on the TV and the HDMI OUT jacks on the Set-
Top Box.
Please check that the HDMI source is powered on.
If not, you can not select “HDMI” in the “Source List”
on-screen menu.
BP68-00289A-02Eng 7/21/04 10:01 AM Page 17