Filter
Top Products
Turning the TV On and Off
20
OPERATION
Chapter Three
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
1
Press the POWER button on the
remote control.
The “Start Plug & Play” is
displayed.
Press the ENTER button to start.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and
subsequently as below.
2
The “Language” menu is
displayed.
Press the … or † button to
select the appropriate language,
then press the ENTER button.
4
The “Air/CATV” menu is
displayed.
Press the … or † button to
select the video signal source,
then press the ENTER button.
3
The “Check antenna input” is
displayed.
Make sure that the antenna is
connected to the TV, then press
the ENTER button.
œ Plug & Play feature doesn’t
work when the V-Chip is
activated or when in the A/V
mode.
Enter Exit
Plug & Play
OK
Start Plug & Play
Move Enter Skip
Plug & Play
Language
English
Français
Español
Enter Skip
Plug & Play
OK
Check antenna input.
Move Enter Skip
Plug & Play
Air/CATV
Air
STD
HRC
IRC
BP68-00289A-02Eng 7/21/04 10:01 AM Page 20