Filter
Top Products
ENG-33ENG-32
Using the Disc Menu Language
This function changes the text language only on the
disc menu screens.
1.With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Disc Menu using UP/DOWN buttons, then
press the RIGHT or ENTER button.
5. Use the UP/DOWN buttons to select the desired
language.
- Select “Others” if the language you want is not listed.
6. Press the ENTER button.
- The language is selected and the screen returns to
Language Setup menu.
Setting Up the Language Features
Using the Audio Language
1.With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Audio using UP/DOWN buttons, then
press the RIGHT or ENTER button.
5. Use the UP/DOWN buttons to select the desired
language.
- Select “Original” if you want the default soundtrack
language to be the original language the disc is
recorded in.
- Select “Others” if the language you want is not listed.
6. Press the ENTER button.
- The language is selected and the screen returns to
Language Setup menu.
AUDIO LANGUAGE
Original
Others
Audio
1.
With the unit in Stop mode, press the MENU button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4. Use the UP/DOWN buttons to select the desired
item.Then press the RIGHT or ENTER button.
Dolby/DTS Digital Out
1. PCM :Converts to PCM(2CH) audio.
2. Bitstream :Outputs Dolby Digital or DTS Bitstream via
digital output. Select Bitstream when connecting to a
Dolby digital and DTS Decoder.
Note There is no analog audio output when you play
DTS sound disc.
MPEG-2 Digital Out
1. PCM :Converts to PCM(2CH) audio.
2. Bitstream :Outputs MPEG-2 Bitstream via digital
output. Select Bitstream when connecting to an
MPEG-2 Decoder.
Dynamic Compression
1. On :To select dynamic compression.
2. Off :To select the standard range.
Setting Up the Audio Options
AUDIO SETUP
Dynamic Compression : On
PCM Down Sampling : On
Speaker Setup
Dolby/DTS Digital Out : PCM
MPEG-2 Digital Out : PCM
Setting Up the Language Features
Using the Subtitle Language
1.With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Subtitle using UP/DOWN buttons, then
press the RIGHT or ENTER button.
5. Use the UP/DOWN buttons to select the desired
language.
- Select “Automatic” if you want the subtitle language to
be the same as the language selected as the audio
preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select
as your initial language; in that case the disc will use its
original language setting.
6. Press the ENTER button.
- The language is selected and the screen returns to
Language Setup menu.
Note
• If the selected language is not recorded on the
disc, the original pre-recorded language is
selected.
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
SUBTITLE LANGUAGE
Others
Subtitle
Automatic