Filter
Top Products
Important Note
• In case of differ from your TV and TV system
setting value video output may be blocked.
• You have to setup TV system correctly.
• Refer to your TV user's manual.
• If you use NTSC disc at PAL TV system, motion
picture may be distorted.
• If you use PAL disc at NTSC TV system, motion
picture may be distorted.
Video Output
Select Video Output.
1. S-Video :Select when you want to use Video and
S-Video Out.
2. Component (Iscan) :Select when you want to use
Video and Component 525i(Interlace) Out
3. Component (Pscan) & HDMI :Select when you want
to use Component 525p(Progressive) Out or HDMI.
* If you press the VIDEO SEL. button, Video output
mode is changed in regular sequence in no disc
mode.
(S-Video ➝ Iscan ➝ Pscan & HDMI ➝ SCART RGB
➝ SCART VIDEO)
4. SCART Output : Select when you want to use Scart
Out.
• RGB : Select when you want to use SCART RGB
Out.
• Video : Select when you want to use SCART
Video Out.
* If the Yes/No selection in the Display Setup sub Menu
is not made within 10 seconds, the screen returns to
the previous menu.
ENG-37ENG-36
TV Aspect
Depending on the type of television you have, you may
want to adjust the screen setting (aspect ratio).
1. 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you have
a TV with a 4:3 ratio screen.Black bars will appear at
the top and bottom of the screen.
2. 4:3 Pan Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
3. 16:9 Wide :You can view the full 16:9 picture on your
widescreen TV.
Still Mode
These options will help prevent picture shake in still
mode and display small text clearer.
1. Auto :When selecting Auto, Field/Frame mode will be
automatically converted.
2. Field :Select this feature when the screen shakes in
the Auto mode.
3. Frame : Select this feature when you want to see
small letters more clearly in the Auto mode.
Screen Messages
Use to turn on-screen messages On or Off.
Black Level
Adjusts the brightness of the screen.(On/Off)
TV System
1. NTSC Disc :In case of using NTSC disc
• If your TV system only has PAL-Video input, you
must choose “PA L”.When you choose “PA L”,
Interlace output format is PAL 60 Hz output.
• If your TV system only has NTSC, input you must
choose “NTSC Output”.
• If you set up the NTSC TV system, HDMI output
frame rate is 60 Hz.
2. PAL Disc : In case of using PAL disc
• If your TV system only has NTSC-Video input, you
must choose “NTSC Output”.
• If your TV system only has PAL input, you must
choose “PAL Output”.
• If you set up the PAL TV system, HDMI output frame
rate is 50 Hz.
HDMI/DVI
This setting is used when the unit is connected by HDMI
or DVI with Display devices (TV, projector, etc).
1. Resolution
- 480p/576p : 720 x 480, 720 x 576
- 720p : 1280 x 720
- 768p : 1024 x 768
- 1080i : 1920 x 1080
2. DVI Output
You can use this function to DVI output format.
• This function corrects a biased TV screen to secure
a normal view.
• If DVI Output is set incorrectly, the screen can be
biased.
Important Note
• Consult your TV User’s Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual’s
instructions regarding Progressive Scan settings in
the TV’s menu system.
• If Video Output is set incorrectly, the screen can be
blocked. (See page 42)
• The resolutions available for HDMI outputs depend
on the connected TV or projector. For details, see
the user’s manual of your TV or projector.
• When the resolution changes, the image may be
corrupted or the output may take longer than nor-
mal.
Setting Up the Display Options
HDMI/DVI
(Iscan)
(Pscan) & HDMI
Resolution : 576p
DVI Output : Mode B
HDMI/DVI SETUP
Setting Up the Parental ControlSetting Up the Display Options
The Parental Control function works in conjunction
with DVDs that have been assigned a rating which
helps you control the types of DVDs that your family
watches.There are up to 8 rating levels on a disc.
1.With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4. Use RIGHT or ENTER to select Yes if you want
to use a password.The Enter Password screen
appears.
5. Enter your password.The Re-enter Password
screen appears to confirm the password.
Enter your password again.
The player is locked ( ).
PARENTAL SETUP
Use Password : No
CREATE PASSWORD
Enter Password
- - - -
0 ~ 9